Keeping within 1 meter of your mobile device, open the charging case lid without taking out the earbuds and ensure there’s enough battery power by checking the LED indicator on the charging case. The Razer Hammerhead True Wireless X is now in Bluetooth pairing mode.
Navigate to your device’s Bluetooth settings to turn on Bluetooth, then scan for and connect to “Razer Hammerhead TWS X”. You will hear an audible cue “Bluetooth Connected” from the earbuds to confirm that they are connected to your device.
Note: Once the earbuds have been paired to a device, they will automatically try to connect to the last paired device every time the charging case’s lid is opened, or when the earbuds are powered on.
With fully charged earbuds and charging case, they can last up to 24 hours with lighting on default, out-of-box settings (6 hours on the earbuds alone plus an additional 3 full charges with the case). They can last up to 28 hours with lighting off (7 hours on the earbuds alone plus an additional 3 full charges with the case).
*Battery ratings measured on an iPhone test device at 50% volume.
Download and install the Razer Audio mobile app on the iOS or Android app stores. The app allows you to select various EQ settings or customize your own, control lighting effects and brightness, remap touch gestures, check battery status on the earbuds, enable low latency Gaming Mode, enable Quick Connect, update firmware, as well as obtain more information about your device.
There are two ways. First way is to triple tap and hold the last tap for 2 seconds on either earbud. You will hear audible cue “Gaming Mode” to confirm that it has been activated. Doing the same gesture again will return to Normal Mode. You will hear audible cue “Normal Mode” to confirm. You can also toggle Gaming Mode on/off in the Razer Audio mobile app. If audio drops/skips, we recommend keeping your earbuds within a very close distance of the audio source when in Gaming Mode (within 2 ft / 60 cm) and switching back to Normal Mode when not gaming.
Yes! First, confirm that you have the latest software installed on both devices. The Razer Hammerhead True Wireless X may be updated via the Razer Audio App. Next, simply follow the Nintendo Switch™ Bluetooth audio pairing instructions to connect your headset.